STEP (Standard for the Exchange of Product Data) .step .stp

DWG (Drawing) .dwg

DXF (AutoCAD Drawing Interchange File) .dxf

SKP (SketchUp) .skp

Units of measurements should be in millimetres

Clear structure tree

Use colours to help make your file easy to read

A STEP-file may contain both a mono-section and a composition (assembly). Quantities in a STEP composition will govern.

Cutr recognizes beams, sheets, panels, and curved shapes made up of volumes (not surfaces).

Cutr will not produce assembly elements such as hinges, drawer systems, dowels, lamellos, adjustable legs, or LED strips.

Parts with holes on more than 5 sides are possible, however, these require additional manufacturing time, therefore increasing the manufacturing costs.

Cutr will not produce parts less than 50x100mm as standalone items. Production of small parts within larger assemblies is possible.

File should be drawn to scale at 1:1

Units of measurements should be in millimetres

Clear structure tree

Use colours to help make your file easy to read

Drawings should not have any double lines - make sure to check your file and delete all duplicates

All elements in the drawing should be at the same Z-value where applicable

Lines must not touch or cut through themselves or each other.

Information such as text, dimension lines and frames, etc. should be removed

Additional information, such as Production Drawings (.pdf) or Renderings (.png .jpeg .tiff) should be included as part of your order upload as a Supporting File or in the Additional Information field in the Options tab on the app